Jet Mist Granite Of Chinese Black Granite is extremely hard and dense stone. Formed eons ago, Jet Mist granite resists weather, wear, freeze and thaw. The density of Jet Mist makes it stain, water and mildew resistant. Born of the inner fires of earth, Jet Mist granite is practically unfazed by fire and heat.
| Production Name | Jet Mist Black Granite Slabs |
| Surface Finishing | Polish, Flamed,etc |
| Sizes Available | 60cmup / 70cm up / 80cm up x150~200up |
| Thickness | 2cm, 3cm,etc |
| Thickness Tolerance | +/-2mm |
| Application | Interior,Exterior,etc |
| Packing | Fumigated strong wooden crate |
| Payment Terms | 30% deposit, the balance by TT or L/C at sight |
| MOQ | Welcome small trial orders |
Before polishing Jet Mist Raw Slab, observe whether there is any problem with the board surface, and try to choose the side without holes for polishing.Care must be taken during the polishing process, and the single-piece inspection should be carried out to ensure that the luminosity of the board surface is above 85 degrees.The places where the 2 ends of the board are not ground should be marked with a red crayon to prevent the cutter from cutting in.
A processing method of flamed finish of slab, firstly sawing granite into a board surface, after initial grinding, and placing it on a fixed frame after initial grinding, and then flame spraying on the initial grinding surface, the granite material processed by this method It shows the nature of the stone, which is simple, rough and strong. The distance between the nozzle of the spray gun and the surface of the board is 20-40 mm, and they are inclined to each other, the temperature of the flame is 800-1000 ° C, and the board is sprayed with water before the flame is sprayed.
